Product description:
It applies to apples, pineapple, etc. after crushing pome fruits juice.
Spiral forward extrusion.
Automatic completion of berries, pome fruit juice, slagging step.
Material contact parts for high-quality stainless steel.
Working theory:
Crushed fruit, juice, through the skin into the hopper into the spiral juicer, bagasse outlet of the coil along the direction of the bottom diameter gradually increased and decreased pitch, when the material is the auger, spiral cavity volume is reduced due to the formation for press materials.
Screw spindle rotational direction as viewed from the hopper to the slag tap direction is clockwise. Feedstock into hopper, under pressure screw propulsion, the juice squeezed through the filter into the bottom of the juice is filled, and the annular gap between the waste material is formed by the tapered portion of the spiral and surge discharged surge move axially adjustable head size voids. For clockwise (from the slag troughs equipment to look into the hopper end turn the hand wheel bearing, pressure head to the left, that is narrowing the gap, the gap becomes larger and vice versa.) Change the size of the gap, that is, adjust the resistance of slag, slag can change the rate, but if the gap is too small, under strong squeeze, part of the slag particles and juice will be squeezed together by the filter, although the juice increased, but the relative decline of the quality of juice, depending on the size of the gap should be user specific process requirements. So as to achieve the purpose of automatically separating Pomace and juice.
Pomace and automatic separation of juice.
Juice contacts for high-quality stainless steel.
